The Simple Compressors
These compressors offer the ultimate in reliable and economical compressed air production. The design of these units is deceptively simple, use the minimum number of parts.The compressors rotating units are all powered directly on one motor with the fan mounted on the motor shaft and the air end directly coupled to the motor with assured alignment using "C" flanged motors.
Sullivan-Palatek 15 through 40 Hp |
|
The motor is directly coupled the input shaft of the air end for extremely efficient transfer of power and without causing addition axial loads as with gear driven units.Sullivan-Palatek 15 through 40 Hp D series units are reliable enough to allow a factory Five year limited warranty on the motor, coupling and air end.(ask for warranty details) |
|
Download Literature
Acrobat Reader
| MODEL |
HORSEPOWER |
POWER OPTIONS |
MAXIMUM FULL LOAD PRESSURE |
| 15D |
15 |
200-208-230-460-575 V3 Phase 60Hz |
125 & 150 PSIG |
| 20D |
20 |
200-208-230-460-575 V3 Phase 60Hz |
125, 150 & 175 PSIG |
| 25D |
25 |
200-208-230-460-575 V3 Phase 60Hz |
120, 150, 175 PSIG |
| 25D4 |
25 |
200-208-230-460-575 V3 Phase 60Hz |
120,150 & 175 PSIG |
| 30D7 |
30 |
200-208-230-460-575 V3 Phase 60Hz |
120,150 & 175 PSIG |
| 40D |
40 |
200-208-230-460-575 V3 Phase 60Hz |
120,150 & 175 PSIG |
Options to Consider :
» Acoustical Enclosure
» Air Cooled or Water Cooled
» Lubricant selection (4.000, 8,000, or 10,000 hour service life as well as Food Grade)
» Platform mounting gets unit off floor for cleaner operating environment and easier maintenance
» Tank mounting for systems with large surge compressed air demands
» Electrical NEMA 4 enclosures and TEFC motors
» Compressors available for international electrical supplies (50 hz)
|
